You can see on the image below the different sizes available: (click to enlarge)

Details

• S
  Diameter and height of the base: 10cm
  Length of the outgoing tube: 16cm, tube diameter: 4cm
  Ideal ratio of the base height vs. the length of the outgoing tube: 10cm x 1.618 = 16.18cm
  Ideal ratio of empty base width vs. the diameter of the tube: 4cm x 1.618 = 6.47, total base diameter 4 + 6.47 = 10.47.
  

• M
  Diameter and height of the base: 16cm
  Length of the outgoing tube: 26cm, tube diameter: 6cm
  Ideal ratio of the base height vs. the length of the outgoing tube: 16cm x 1.618 = 25.88cm
  Ideal ratio of empty base width vs. the diameter of the tube: 6cm x 1.618 = 9.71, total base diameter 6 + 9.71 = 15.71.
  

• L
  Diameter and height of the base: 18cm
  Length of the outgoing tube: 29cm, tube diameter: 7cm
  Ideal ratio of the base height vs. the length of the outgoing tube: 18cm x 1.618 = 29.12cm
  Ideal ratio of empty base width vs. the diameter of the tube: 7cm x 1.618 = 11.33, total base diameter 7 + 11.33 = 18.33.
  

• XL
  Diameter and height of the base: 23cm
  Length of the outgoing tube: 37cm, tube diameter: 9cm
  Ideal ratio of the base height vs. the length of the outgoing tube: 23cm x 1.618 = 37.21cm
  Ideal ratio of empty base width vs. the diameter of the tube: 9cm x 1.618 = 14.56, total base diameter 9 + 14.56 = 23.56.
  

• XXL
  Diameter and height of the base: 30cm
  Length of the outgoing tube: 48cm, tube diameter: 12cm
  Ideal ratio of the base height vs. the length of the outgoing tube: 30cm x 1.618 = 48.54cm
  Ideal ratio of empty base width vs. the diameter of the tube: 12cm x 1.618 = 19.42, total base diameter 12 + 19.42 = 31.42.
  

We are environmentally conscious, please note the:

• The bubble wrap is made of PET, it can go in the normal plastic recycling bin, or even better, reuse it if you can.
• The cardboard is generally made from 80% recycled paper and 20% sawmill waste.
• The brown tape is made of PVC and natural rubber and can be recycled directly with the cardboard (https://www.tesa.com/en-gb/industry/tesa-4124.html).

After a lot of testing over the years, there was no other way, because orgonites are objects that can have broken corners when hit. Since there are unique orgonites that cannot be re manufactured identically, this packaging is necessary to ensure that they reach you without suffering any shock. They must be completely blocked in the package so as not to wander and risk shocking each other and also not to receive any shock from the outside.

Filling packages with large air packets is not enough (too fragile), filling with cardboard/newspaper does not work (not enough shock absorption capacity).

This pricing system was carefully decided over several years to assess the average time it takes to add content to the site, to personally answer questions, update the site to take these new questions into account, etc. Because answering all the questions and providing the best information possible is a priority, but it takes time. In general, the more people place orders over the years, the fewer questions they ask, so the price of the time it takes to answer questions no longer has to be taken into account. You can also use your reduced rate to buy orgonites for friends, because again, if it is by word of mouth, it will be you who will explain much of the subject to your friends, which will save us time, that’s perfectly fine for us. From time to time when there is a very relevant question, or a lack of specific details on a topic, this information is added here and there to supplement the site as best as possible so that you can still and always find the information even better by yourself, or that we can easily redirect you to a very complete explanatory page so that we no longer have to write a long email each time to reply.

There are four rates: full rate (less than 500€ of cumulative purchases, VAT excl.), 1st reduced rate (500 to 1000€ of cumulative purchases, VAT excl.), 2nd reduced rate (1000 to 1800€ of cumulative purchases, VAT excl.) and the minimum rate (over 1800€ of cumulative purchases, VAT excl.). A detailed table appears at the bottom of the page.

When ordering, depending on the total amount exclusive of VAT (shipping not included), if you qualify for discounts, these will be applied on the confirmation page.

The amount of each consecutive order is added to the previous orders and saved in our database. The cumulative total is taken into account for calculating the current order rates.

For example, if your first order totaled 300€ (VAT excl.), for the next order amounting to 300€ (VAT excl.) the 1st reduced rate will be applied. If your first ever order is equal to or greater than 1800€ (VAT excl.), the minimum rate will be applied to this order and remain permanent for all subsequent orders.

The full rate price will always be used for determining the decreasing prices.

IMPORTANT: You must always use the same email for every order, otherwise the amounts previously ordered cannot be taken into account. If you change your email, please contact us so that we can update the database.

IMPORTANT: The cumulative amounts of orders are stored in the database only after the payment has been received and the orgonites dispatched. If you placed 2 orders, the 2nd immediately after the 1st, because you forgot something in the first order, or changed your mind, the amount of the first order cannot be taken into account immediately for calculating the decreasing prices of the 2nd order. However, this detail can be manually modified later.

Rates

For Round TBs, Heart TBs, Induction TBs, Cloudbusters, the rates are in the following ranges:

• 1st reduced rate: -6%
• 2nd reduced rate: -12%
• Minimum: -20%

These rates also apply to all Unique Orgonites for which the rates are in the range of:

• 1st reduced rate: -5%
• 2nd reduced rate: -10%
• Minimum: -17,50%

These rates do not apply to Orgonite making supplies, because discounts are already effective the more the quantity ordered increases.

As far as Cloubusters are concerned, the full version includes the copper pipes, the price of which cannot vary, 169€ (VAT excl.) / 202.80€ (VAT incl.) will always be added.

since I’ve been asked the same questions many times, here are the answers to some questions you’ll probably also ask me. Or maybe want to ask me but won’t want to disturb me?

• Orgonites composition
• Wooden chips

As explained on all the pages, I always mix the aluminium shavings with about 1-2% of wood shavings to add a bit of the energies of nature. Who knows what effects the DNA of trees contained in all these shavings has? DNA reacts to all kinds of electrical/electromagnetic stimuli, the addition of wood (and hence trees DNA) in the orgonites has clearly an influence, hard to measure scientifically these days (in 2015), because we don’t have the tools yet. As I say it on the pages as well, it adds the energies of nature, which is well centered on the energies of the heart.
One day will come when I’ll be able to give you objective scientific proofs, maybe by 2020 or even later, unless someone else does it instead of me! For the moment it’s the feedback from energy sensitive people that confirms these words.

• Other irregularities

I get the comment once in a while :

• what are the black bits in the shavings?
• the red bits, green, gray, etc. inside the shavings?
• and other ‘things’ that are inside the orgonites that don’t look like aluminium?

The shavings I use are scraps from PVC/aluminium windows/doors manufacturing industries and hence there are often bits of PVC, plastic/rubber joints and various plastics that are part of these windows and doors. It’s almost impossible to filter it all out with sieves to obtain pure aluminium, the only way would be to melt the aluminium as they do in recycling centers… I just can’t! Hence that’s it, these various bits that always change are the plastic bits I can’t filter out of the shavings.

• Initial smell of the orgonites

You’ll notice it straight away when you receive my orgonites, one side is very different from the others, all sides are mostly shiny and smooth, except one side, it’s the side that cures on top in contact with the air.
And that’s what makes this face different. To be shiny and smooth, the resin must cure without air compressed in the mould which has a smooth inside.
It will be clearer with a picture (a small workshop I had when I was studying in UK, Wales in 2008 ):


You can see how the orgonites are made, when I’m waiting for them to cure, there’s that face on top that stays in contact with the air.
Such that while the resin hardens this side becomes irregular, some air bubbles, small bumps, pieces of plastic/aluminium that float up etc.
There’s also a very thin layer of resin that never hardens, and non-catalyzed resin always smells like resin if it’s never removed… That’s why I have to clean this side with acetone, which is a resin thinner, with acetone I can remove that thin layer of non-catalyzed resin, after that remains only the 100% inert plastic, but it makes that side dull at the same time.

The smell you can smell when opening my parcels is the smell of acetone, because I don’t often have time to let the orgonites aerate for a long time (more than 2 weeks) after having cleaned with acetone.
Acetone needs a couple of days to evaporate fully (it’s alcohol, it evaporates at ambient temperatures). Since I often send the orgonites 1-2 days after having cleaned with acetone, the acetone evaporates inside the closed parcel… Hence when you open it, it is the smell of acetone that you might smell, it’s a slightly irritating smell! If the parcel is big, 10-15kg and more, the smell will be quite strong!

Acetone is not known as being toxic for us, especially at such low concentrations.

However there is one detail I cannot hide, with Cloudbusters, the smell of resin takes around 3 to 6 months to leave completely, because there is a reaction between the tape at the bottom of the pipes and the resin. I can’t do much about it, you just have to wait for it to be over, it takes time.

IMPORTANT : Gifting TBs are not cleaned at all, a large parcel of those will have quite a smell of resin! Without any clean-up, the non-catalyzed layer can take many years to dissipate by itself, when the temperatures are quite warm you’ll be able to smell the resin evaporating, and that’s slightly toxic, there are only bacterias in nature to take care of decomposing that stuff correctly, that’s why I mostly recommend these orgonites for outside use…

When you’ll receive your order :
This regards all other orgonites : Round TB, Heart TB, Induction TB, Cloudbuster. I never clean up fully, i.e. I sand the edges, I remove the dust roughly by vacuuming and then rub all the surfaces with acetone, obviously with an added emphasis on the side that dried in contact with the air. But the final rinsing/cleaning is for you. The orgonites are basically delivered ready for the final cleaning, the rests of dried up acetone mixed with dusts etc. sticking on the orgonites should be cleaned, which is also why they can stink a bit, with the acetone, there is sticky/dilluted non catalysed resin that should be washed off. This rinse is great for the energies, as you probably read here; “Operating Instructions” for orgonites > How to cleanse/purify/re-charge orgonites? ; putting an orgonite under gently flowing water will cleanse it. It will be the final touch, perfect to set them up in your home with love! But first start with abundant and warm water to properly clean the acetone and dusts, do not hesitate to scrub and use soap, and then finish with gently flowing cold water, dry them up and they’ll be all good to go.
Please do note : The orgonites with an almost perfect finish, total shininess, perfectly smooth on all sides etc. that you can find here: Unique Orgonites and/or some here : Damaged Orgonites don’t have to be cleaned, they went through all the steps described below. They undergo, on average, a maturation period at 40-50 °C for 2 days and post-cure at around 60-80 °C for one day, plus total cleaning/polishing. Anyhow, if you order one with other orgonites on the site, it is noticeable directly by seeing and touching them that they have a finishing much more thorough than any other orgonite on the site. These orgonites can actually be put in direct contact with food …

For your information, here are the technical details of the resin I use, crystic R115 PA:
crysticr115pa_en.pdf

Here are the infos that usually are of importance to everyone:

Food contact
The results of the global and specific migration tests being below the maximum value set by the European Regulation (CEE n° 85/572, 90/128, 93/8) CRYSTIC R 115 PA may be used in contact with foodstuff. Mouldings which are to be used with foodstuffs should be cured with catalyst type Butanox M50. After release from the mould, laminates should be allowed to mature for 24 hours at workshop temperature (20°C). They should then be post cured for a minimum of 3 hours at 85°C.
The mouldings must be thoroughly wet steam cleaned for at least one hour before being put into service. If wet steam cleaning is not practical, and if the moulding is a vessel, it should be filled with hot water (60-80°C) containing a non perfumed detergent and left to stand for two hours. It should then be emptied thoroughly washed in several batches of clan hot water.
These precautions are essential to avoid the tainting of foodstuffs.

It’s a resin that can be of food-grade, I follow the procedure, the catalysation is never below 15°C and then the orgonites remain much longer than 24h at temperatures above 20°C. However I cannot cure thousands of orgonites at 85°C for 3 hours, I don’t have the means, or else I would have to make you pay a lot for the heating! I think no orgonite seller (working with polyester resin) in the world follows the strict procedures required for the manufacture of plastic, because none of us has the means, only big industrial companies do.
Maybe one day I’ll be able to fully follow these rules like a big company. But you have the instructions, you can do it yourself, on a very small scale it’s quite easy to do.

Just think of a black car hood in full sun on summer days, it can easily reach 85°C. Obviously you might not be able to do that asap. when you receive the orgonites, but a day when it’s sunny, hot and there’s sun, you just have to put the orgonites on a dark piece of metal, they’ll easily finish the curing process at 85°C. For your information, 3 hours are required, nothing prevents you from letting it 5 hours, or ten, 3 hours minimum are needed, that’s all, and you know how to use a thermometer, so please don’t ask me questions about. I’ll also leave you the fun of finding a dark piece of metal Plunging them in 80 °C hot water in a large pot is also very easy!

An additional note, by working with polyester resin to provide you with low priced orgonites I put myself under a lot of constraints that other people using epoxy don’t have, with epoxy there aren’t that many problems, it can cure in contact with air, it doesn’t need high temperatures curing. But you have to pay the price I’m telling you that also, so that you don’t go and ask useless questions to these people

You’ll find some more information on the following pages:

The paradox of orgonite
Information for electrosensitives
Questions/Answers in bulk

But here we are, what I had calculated on that page last year: Rough estimate of costs (May 2013) is completely wrong, even with the first increase of prices in 2013 I am far from being able to make a decent living, thankfully there are my parents behind (no rent, no utility bills, no household taxes, etc.). Without that I would have never been able to keep going with these prices. Though I must re-state, I am very happy that I was able to reach so many people with the knowledge of orgonite. I hope you’ll understand that I have to increase my prices by about 25%. In august I’m getting into my third year and my tax rate, for new company creators, is increasing from 14,3% to 20,6% aswell, that already meant 10% automatic increase anyway.

I had written on that page: Prices changes (May 2013) I quote:

In fact, I am really happy to send out those many orgonites every month, I would be even happier to send out more of them. Just by working on my own I should be able to go up to 3000 orgonites a month… But if I earned a little more (something close to the French minimum wage would be enough) I could again take some time off once in a while to go gifting; there are still so many places to gift, I would really like to continue being able to go gifting more often! Also, I would appreciate to have some time off to add more content to this website (and translate) so as to diffuse even more information, as there are many things I’d like to share: gardening methods, my insights about the relationship between sound, electricity, light and living beings and globally bring forth more useful information on a plethora of other topics mostly related to nature, health and physical/spiritual energies. There is actually a multitude of ways to promote good energies, orgonite is just a very simple and safe method; but by playing with water, sound, electricity, there are many other things to know! Take playing classical music to plants during day-light, I think that’s even better for them than orgonites…

And it’s still quite valid!! In a year I only managed to find a little time to add a couple of articles about electroculture and carry on with my experiments in the garden. There are still loads of translations that are missing and a lot of topics I’d like to share, but I need to find the time to be able to write!
Thanks again for all the wonderful encounters and email discussions.
I will also try, during this update period, to add minor changes to many pages based on a lot of feedback i got during these last 2 years. Also update the page for the cloudbusters, the UPS problem has been solved, I can ship a complete cloudbuster anywhere, but I never had time to update the page (I have to update the 4 languages at once). Anyhow, I’ll writeup a small summary to indicate what has changed and where when it’s done.