What’s orgonite


2019.11 : page still in the works, no idea when it will be done! 2025?


In short

Orgonite is an object that has beneficial and vast properties. It has a basic composition containing at least always 3 materials: metals, quartz, all embedded in resin.

composition

Nowadays orgonite is available in all sizes and shapes: key rings, pendants, interior objects, pyramids, spheres and more imposing objects for the outside environment. Orgonites can be very simple or very sophisticated. As long as the metal-resin-quartz mixture is present in a large part of the orgonite, it will be functional. The resin used by the creators of orgonites is usually synthetic (plastic). Natural resins or caramel are sometimes used but rarely privileged because of their lower strength and durability compared to synthetic resins.

Orgonite has very wide beneficial effects affecting almost everything that exists: living beings, materials and fields considered as energetic or spiritual.
Orgonite enhances the vitality of plants and accelerates their growth, it improves and increases the shelf life of fruits and vegetables. The phenomenon is blatant with bananas, which can easily be stored for more than 3 months.

It diminishes the negative effects of electromagnetic waves on us and all other living beings.
The oxygen level seems to increase sensibly in water in the presence of orgonite: about 100g of orgonite for 2-3m³ of water can reduce the chlorine required in a swimming pool by half.
In the presence of orgonites, in cars without electronically controlled injection, fuel consumption can be reduced by 10-20% and the acceleration is better.
The structural stability of the materials is improved: wooden chalets crack less with variations of temperature and humidity, low-end refrigerators also show this phenomenon.

In areas less known to the general public, orgonite is useful to neutralize some unpleasant natural faults, such as crossings of Curry or Hartmann networks. Some people feel the energy of orgonite, commonly called orgone.
On this topic, two types of activity, notably anchored in our society for a long time, attest to the existence of phenomena linked to energies that are still not very explicable: water-dowsers, which are often called upon by drilling companies, and fire cutters who work in some hospitals in some countries.

The action of the orgonites on humans, on the body and the mind, is the most difficult to define. Simply summarized, orgonite helps us to evolve personally in the long term. In the short term one can perceive analgesic effects, vitalizing, euphoric and much more, or not feel anything in particular.
As with medications, the effects can vary between individuals.
What happens with sleep best illustrates this phenomenon: it is mostly improved, but in some cases, such as in stressed or anxious people, it becomes more disturbed, especially during the initial exposure to orgonites, However this discomfort always fades because in the long term the effect is always beneficial, the quality of sleep improves.

In short, orgonite helps us to progress physically, psychologically and spiritually, in a variable and subtly different way for everyone.

The examples being too numerous and the explanations of the phenomenon produced by the orgonite being quite complex, the detailed version is there to address the subject more in depth.

In detail



Historical background

In the 1930-50s Wilhelm Reich, physician, psychiatrist, psychoanalyst, researcher, carried out experiments on bioelectricity, which was according to him composed of particles called bions. Wilhelm-ReichThese are a sort of particles of blue light that we can all see by looking at a blue sky, they are blue/green/yellow dots that keep on appearing and disappear at very high speed. In science there is an explanation for this, Scheerer’s phenomenon, or also called the blue field entoptic phenomenon, caused by white blood cells moving in the capillaries in front of the retina. But this explanation is unsatisfactory, the dots should not be visible in the center of the field of vision since there are no blood vessels there, however this effect covers the whole field of vision for many people. I leave it up to you to test it.

Wilhelm Reich has done a great deal of research, the ones that are of particular interest to us are those on cabins made up of an exterior of alternating layers of organic and inorganic materials, which led to the discovery that these cabins accumulated an energy that had revitalizing effects on people who spent time inside them.
He observed a recurring phenomenon that occurred in these cabins, many people had a beginning of an orgasm. Thus he named this beneficial energy ORgone in reference to this, because he considered that it is an energy that we all release during an orgasm. In the same way he named these cabins orgone accumulators.

Orgone had obviously many other names, before him, another savant, Karl von Reichenbach, living in the 18th/19th century spoke of an Odic force, a force that he believed to be a primary component of electricity, magnetism, heat and living organisms in general. Well before all these scientists, the sages of Asia already had the notion of Chi or Qi, the sages of India had the notion of Prana and all say the same thing on the subject no matter what name is used: it is an energy that is present in everything that exists. Ether in antiquity was also a name for this fifth “element” in addition to fire, water, earth and air. Nowadays, open minded scientists use the name of torsion fields.
Returning to the orgone accumulators, however, there was a problem of size, they accumulated as much the positive orgone, as the negative orgone. In a polluted environment or unfit for life, the accumulator could become very harmful to our health.

Positive orgone and negative orgone are widely used generic terms that were invented by Wilhelm Reich. These terms have also been shortened in English to become POR (Positive ORgone) and DOR (Deadly ORgone). Practical terms that will be used from now on if necessary.

The “-ite” suffix simply means, “native of”, “with origins of”. The name orgon-ite was naturally created by Karl Welz in the 1990s when he discovered that a mixture of resin (organic material) and metal chips (inorganic material) seemed even more effective than Reich’s accumulators.

This was followed by the addition of quartz in the resin-metal mixture. I can not confirm the historical aspects, but it seems that it was Don Croft who discovered this, I do not know how, in the early 2000s with the invention of the orgonite cloudbuster, an orgonite with metal pipes to radiate orgone into the sky. In this cloudbuster he tried to add quartz points in the tubes and this changed everything compared to the resin-metal mixture without quartz.

Cloudbuster induction CloudBuster-Reich

Please note that the “Reichian” Cloudbuster is different from the orgonite Cloudbuster. Wilhelm Reich had also invented a Cloudbuster, his version was an assembly of metal pipes connected to a body of water, it accumulated the POR of the water to project it into the sky. Such a cloudbuster could be used to bring rain into desert areas with the disadvantage that the supply of water could also become negatively charged over time. The Cloudbuster in orgonite is a little different in the sense that it does not necessarily cause excess rain, it does not project POR in the sky on command, but neutralizes the DOR, this has a regulatory and positive effect on the climate. In our day the term Cloudbuster is used here and there without always making the distinction, be careful to distinguish which version of the cloudbuster is being discussed when you read a text on this subject. :)

Orgonite solves the problem of orgone accumulators, because it does not accumulate, it transmutes negative orgone into positive. This is a fundamental difference between orgonite and an orgone accumulator. An accumulator can accumulate POR and DOR. An orgonite does not work on the same principle, it generates POR if placed in a ‘neutral’ place but if it is placed in a ‘negative’ place it will transmute the DOR into POR.


Before we start

For your information, I like to do my research rigorously and with a scientific approach. But from my point of view to be scientific is just as much the fact of having a classical objective approach, than questioning again and again what one thinks he knows and understands, as well as to question our conception of the reality. So I’ll start with the fairly conventional scientific approach, something I love doing. But I will also continue with a spiritual approach that will seem to some much less down to earth, because I also love doing this. I know that some people like both approaches like me, others are more interested in one or the other. The two are indissociable in my opinion and to tell you the truth, this is what I like the most and what allows me to learn the most. :)

There is a well-known experiment in physics called the “Double slits experiment”. In this experiment, light (or electrons) is projected through two parallel slits to prove the double nature of light, i.e. it behaves as much as a wave as a particle. If the two slits are open, the light is dispersed in a way that respects precisely the mathematical rules of interference, proving that light behaves like a wave, but if only one slit is open, the light is aligned in front of one slit like the trajectory of a particle that goes straight. Later we were able to prove that the two behaviors occur at the same time, wave and particle simultaneously.

Youngs_Double-Slit_Experiment

Another experiment has brought to light a phenomenon that is even more primordial for science, the effect of the quantum observer. From the point of view of quantum physics light is in a state of superposition at the moment of passing the two slits, which means that it passes through both sides simultaneously. To try to elucidate which slit the light was passing through when the two slits were open, we measured directly at the slits to know where the light went through, the fact that we were interacting with the photons at one slit or the other (to detect) created a “collapse of the wave function” at the location of the measurement, which altered the normal statistical distribution. This result lead us to an intrinsic problem of science, the simple fact of observing an experiment is an interference, the observer inevitably affects the result of what is observed. If we apply this to every person in this world, it becomes a subject of deep philosophical reflection on which one can discuss for a long time while always arriving at the same conclusion, it is impossible to know what happens without an observer, observing affects everything.

So let me come back to the second way in which I will describe the effects of orgonites, especially with regard to the effects they have on us and any form of life, physical and non-physical. With large-scale experiments on hundreds or thousands of people and/or plants it is statistically very possible to prove several effects. But other more personal effects are very subjective, the observer creates his own conception of reality, it can not be otherwise. Spirituality, forms of life outside of this physical reality, certain subtle energies whose existence can not yet be proven objectively, all this is to me as important as the explanations considered scientific.

Let’s start with the technical explanations.


Technical explanation of orgonite

You will not find scientific explanations on the subject, because from an official point of view it remains a pseudo science. I tried to introduce the subject for a project at the university during my astrophysics studies, but it was not accepted because I was told there was nothing to discover. This is completely false, it is just a consequence of the compartmentalization of the fields of research, biology, chemistry, physics, etc. It is necessary to bind many domains to study orgonite.

I will try to explain how an orgonite works and subtle energies in general. I will also try to explain what positive and negative orgone are. The terms DOR/POR are very appropriate but also very simplistic, if we want to understand it all more precisely, we have to dig much more.

It’s complex. I’m trying to simplify the subject for people with no advanced knowledge of physics while keeping it precise enough for those who have the same knowledge as me. There will be approximations that are sometimes simplistic for the point of view of a physicist or electronic engineer, I am forced to do it because the explanations are complex. Please also note that the meaning of some of the terms used will not be equal to their strict meaning in physics because there is a lack of many terms to describe these phenomena like I want.



How quartz oscillators work

oscillator_schematic

First, in order to understand a large part of the functioning of an orgonite, it is necessary to understand how a quartz oscillator works. Like the one on the example above, a quartz oscillator based on a Colpitts design.
Don’t worry, you don’t need to understand anything about the schematic. :)

The way any quartz oscillator works is always the same, an initial random signal is injected into the circuit, it is generally the background noise of the circuit itself, then the signal passes through the quartz, a new signal at a more precise frequency emerges, then this new signal returns to quartz, which provides an even more accurate one, etc. Until a signal with a perfect oscillation is obtained. In practice this occurs in the blink of an eye, when a quartz oscillator is switched on, a signal with a perfect oscillation is almost instantaneously produced.

In an electronic circuit, the quartz is precisely cut and embedded in a metal container to produce the desired oscillation frequency.

In practical terms, we start with an electrical signal like this:

noise

And we get a signal like this:

sinewave

Hence the utility of quartz in watches, because a perfect signal oscillating at a very precise frequency is availble. For example, the value 32768 Hz is very used, which means that the signal oscillates exactly 32768 times per second. Thus with another measurement circuit one can calculate a second precisely because it is known that there is a clear reference signal which oscillates exactly 32768 times per second.



Electrostriction

A quartz oscillator works thanks to the electrostrictive properties of quartz. The latter, subjected to an electric field, deforms (microscopically) and then regains its original shape and generating another electric field in return.

Electrostriction is a property of all dielectrics, i.e. all electrically insulating/non-conductive materials. The majority of all semi-precious stones fall into this category, quartz evidently, quartz varieties (rose quartz, amethyst, citrine..) and all other kinds of non-conductive stones, tiger eye, tourmaline, jasper, calcite, etc. The resin itself, glass and any insulating material. It is a property of all dielectrics known since a long time, but science is not very interested in the study of electrostrictive reactions of minerals or semi-precious stones. When it comes to discovering better ways to produce polymers for the industry, improving the structural properties of these materials, there is plenty of research…

Just remember that almost all minerals are electrostrictive, i.e. they react to the electric fields to which they are subjected. Take good note that we are speaking of electric fields, and not electromagnetic fields.

Please note that I am ignoring many very technical aspects here. For those who will understand, here are some details. In the case of electrostriction, the strain produced in the material by the application of an electric field is proportional to the square of the electric polarization. This means that a change of polarity of the electric field will have no effect. Whereas in the case of the inverse piezoelectric effect, the effect is linearly proportional to the electric polarization. Electrostriction is a general property of all dielectrics, whereas piezoelectricity and inverse piezoelectricity is restricted to certain crystals with specific symmetries, notably quartz. For the effects of energy generation, it is the piezoelectric effect that is used, but in the quartz oscillators, it is electrostriction.



Properties of materials in orgonite

A basic orgonite is composed of metal chips bathing in resin with a quartz stone (and more). Metal chips in orgonite, like any metal, have the capability to receive and emit electromagnetic fields. The resin is an organic material, therefore electrically insulating. However, an electrical insulator, more technically a dielectric, may possess electrostatic dipoles on an atomic scale that react to external electric fields. These electrostatic dipoles are present in the resins used for the creation of orgonites. There is all the beauty of the orgonite, the resin/metal mixture creates an electric conductor of acceptable quality, orgonite has a rather low resistance of a few ohms, current passes well through it, like in a very poor quality electrical cable. I suppose that caramel and natural resins, which also work to make orgonites, also have this presence of electrostatic dipoles, unfortunately there is no research on the subject…

One of the arguments often used naively here and there is that the orgonite absorbs negative waves and transmutes them into positive waves. But if this were the case, an orgonite would massively disrupt wireless communications as it is supposed to change the disturbing electromagnetic signals of these devices into something else that is no longer negative for us. This is not the case at all, wireless communications work very well in the presence of any number of orgonites.

To understand what happens when an electromagnetic wave interacts with an orgonite, it is necessary to return to the resin and metal mixture. The metal captures all the surrounding electromagnetic waves. Any external electromagnetic field captured by metals is decomposed into its electrical part and its magnetic part. The resin containing electrostatic dipoles transmits only the electric fields in the orgonite. This will stimulate the electrostrictive response of the stones (and other additions) included in it and will return new electric fields that will be re-emitted in electromagnetic fields by the metals.

The original electromagnetic fields are not directly modified by the orgonite, which is why it does not disturb any wireless transmission system. Orgonite acts, in part, by interfering with these original signals and with the electromagnetic emanations of living beings, these interferences modify the deleterious reaction of our body w.r.t. to these external waves. These interferences also modify the reaction of our bodies in relation to our own deleterious electromagnetic emanations. Please be patient, you will understand slowly and surely as you keep on reading. :)

The electrostrictive reaction of the minerals in orgonite is one of the centerpieces of this magnificent creation.

Many attempts to explain the functioning of the orgonite explain that it works due to the piezoelectric effect of quartz, this is not correct.

The piezoelectric effect is an effect in which the quartz being compressed mechanically emits an electric field back when the compression is released. To maintain the piezoelectric effect, the quartz would have to be compressed and decompressed repeatedly, but this is not the case in orgonite. When the resin of the orgonite hardens, it shrinks a little and everything is compressed once and stays like that indefinitely. Once the curing has been completed, there can no longer be any piezoelectric effect.

However, the piezoelectricity of quartz in orgonite is also of some important, the piezoelectric effect of quartz is active at the time of the hardening of the orgonite. It is certainly for this reason that during this stage the orgonite seems to be very powerful according to the feelings of people sensitive to subtle energies.

We will come back to this later.

Interaction of the orgonite with the electromagnetic environment

In a extremely simplified way, orgonite picks up the electromagnetic fields around it, modifies them and re-emits new ones that interact by interfering with the previous ones to make them more beneficial to life at each interaction.

orgdiag

It is all, all, all the surrounding electromagnetic fields that come into play, no matter how weak they may be. All living things emit electromagnetic fields of low intensity, humans, animals, plants, microscopic organisms, absolutely everything. There are of course also artificial sources, Wifi transmitters, radio waves, 2G, 3G, 4G, digital TV signals, etc.

For your understanding, an electromagnetic wave is carried by a photon, which means light. The waves that we use for our wireless devices usually have frequencies between a few MHz up to a few GHz. But it’s not just that, UV, infrared, etc. are also electromagnetic waves. These electromagnetic waves have frequencies in the THz regions (thousands of GHz). Visible light is the only frequency band of electromagnetic waves that we can see with our eyes.
The whole environment is electromagnetic.

There is also another essential point to understand, the notion of background noise. Unlike an electronic device that detects electromagnetic fields only down to a certain degree of power, orgonite has no limitations on this aspect.

In a device which has to receive an electromagnetic signal, when the power of the signal to be picked up is too low, it is no longer detectable by the sensitivity of the device. This does not mean that it no longer exists, the signal still exists, but it is mixed and indissociable from background noise, the device can no longer distinguish it from background noise.

Background noise is an electromagnetic disturbance of very low power present everywhere, all electronic devices are subject to it, the pre-requisite for a device to detect a signal is that the signal is of sufficient power/amplitude to be well distinguishable from the background noise.

To understand the problem of background noise, imagine that you are trying to recognize the voice of a specific child in an oversized and overcrowded schoolyard in the midst of billions of children who are all making noise. The background noise is the equivalent of this yard, it is a mix of countless frequencies that means that when a signal that has the same power as the background noise, or a lower power, it becomes very difficult, even impossible, to distinguish it from the rest.

Technically, in our electronic devices we often have volt voltages of the order of volts, or millivolts (10^-3 or 0.001 V), when we start reaching microvolts (10^-6 or 0.000001 V) and especially nanovolts (10^-9 V), picovolts (10^-12 V), and so on. It requires extremely precise equipment and we’re completely inside the background noise.

The raw materials of an orgonite do not have this limitation, they react to all the waves that they can capture and to all the degrees of power. The metal in the orgonite captures all the electromagnetic fields with the background noise and the stones in the orgonite respond electrostrictively to everything with multi-frequency responses.

For physicists, I know full well that each material has its structural limitations and is also limited to a certain spectrum of what can be captured, reflected, refracted, and so on. However, there is an obvious and enormous difference between the limits of raw materials compared to the limits of an electronic device. The precise details of the materials would be interesting to have, but there is little research focused exactly on the subject and it goes far beyond the simplicity of these explanations.



Structured electrostrictive response

As explained earlier, the electrostrictive response of minerals in orgonite is a centerpiece. Because the stones have a precise crystalline structure, or in other words, a very orderly atomic structure.

Since resin is non-conductive, it is also electrostrictive, but it does not normally have a very orderly crystal structure. However, in the presence of music and/or other vibrations during the hardening of the resin, it is possible to give it an ordered crystal structure as well. We will come right back to that afterwards.

Every crystalline structure coordinates the waves that circulate and interact through it. Like a philharmonic hall which is designed to produce optimum acoustics thanks to the coherence and spatial harmony of the sound waves.

BB8291-11

Each mineral has its respective oscillation frequencies, due to its unique crystal structure.
We speak of frequencIES in the plural, because in the simplified example of a quartz oscillator the stone is cut precisely to have a single frequency, or maximum 2-3 harmonics of the base frequency. Raw and uncut stones can have thousands of different and simultaneous oscillation frequencies.

The mix of electromagnetic waves received by orgonite is modified to reemit others more coherent ones, which by interference bring more harmony in the electromagnetic environment.

Another essential point that can now be addressed is that of the piezoelectricity which occurs only at the moment when the resin hardens. It is said everywhere that quartz (or a variety of quartz, amethyst, pink quartz, etc.) is essential to the composition of the orgonite. Indeed, this is of a primordial importance at the time of catalysis, when the resin hardens. The fact that it is compressed at this time generates multiple harmonic electrical signals that promote an ordered crystalline structure that will remain forever imprinted inside the orgonite. In the same way music and any other type of vibration will have these effects. If coherent/harmonic vibrations are present while the resin catalyses, they all induce a certain crystalline arrangement which will remain permanently in the resin.

Additions of various plants extracts or remains of living things, hair, etc. Will all have an influence on the coordination of electrical signals in the orgonite. DNA is a complex molecule with an extremely complex structure that also reacts to electric fields, DNA even reacts directly with many other fields. The addition of shells and other natural shapes with a geometric structure will also have an effect, these shapes, just like a philharmonic hall, also have properties that affect the displacements and interactions of waves. Do not forget that everything that is insulating is electrostrictive, there are plenty of things that fall into this category.

Almost everything in the orgonite will have an effect. But it is good to count on some sure bases that should always be present, i.e. The basic quartz, which crystallizes a crystalline structure during catalysis and minerals/stones which are certain to have a crystalline structure and electrostrictive properties. We’ll be able to come back to these subjects later in the less scientific part. :)

We can summarize “simply” the whole process that occurs in an orgonite as follows.
The crystalline structure of stones, minerals and resin in the orgonite coordinates the waves that circulate and interact within it. Any other addition that has an harmonizing/structuring effect on the waves participates in this coordination. Orgonite amplifies the structuring/harmonizing effects of everything it contains and thanks to it these effects can propagate in the surrounding electromagnetic environment.

We’ve just begun to tackle the surface of the subject, on these good bases we can soon begin to explain the beneficial effects of this harmonizing process of the electromagnetic environment. But first, some more essential notions of physics. :)



Basic principles of waves, oscillations, interference and harmonics

In physics there is a common basis for everything, the phenomenon of oscillation. Any wave is governed by the same basic rules, an amplitude and a frequency.
Electromagnetic waves, electric/magnetic fields, seismic waves, sound waves …

The difference between these wave phenomena is the speed of displacement and the space of displacement, for example, sound and seismic waves are physical vibrations, they only propagate in matter, on the contrary, electromagnetic waves move very well in the void of empty space.

All the same basic principles apply for these vibratory phenomena, reflection, refraction, interference…

It is especially this last point which is of interest to us here. Interference can be constructive or destructive. Waves interacting with each other can add up (constructive) or subtract (destructive).


Constructive interference

The most concrete example of constructive interference is resonance, the same vibration is repeated indefinitely and is added up to itself.

If 10 people tapped a spoon on a table once a second and they tapped all their spoons in rhythm, they will only increase the vibration, if they all hit the same table, the table will vibrate much more than if it was only one person doing it.

Constructive interference increases the total energy.

constructive



Destructive interference

Imagine two identical waves in the water coming one toward the other face to face, at the point of contact there is no more energy, because one wave perfectly cancels the other.

Many headphones nowadays use this principle for the active noise control, they record the noise coming from the outside and superimpose this audio stream 180° out of phase (inverted) on the audio stream of the helmet, this destroys the external sound for anybody using that helmet.

Destructive interference decreases the total energy.

destructive

Animation, click to view:
interference

– still in the works –



Harmonics

For our topic, orgonites, the principle of interference is especially important to address for the special case of harmonics. A harmonic is a wave that vibrates at a precise ratio (integer) of another.

Moodswingerscale

Take the example of a person tapping a spoon on a table once a second (which equals to a frequency of 1Hz) and another person tapping a spoon once every two seconds (0.5Hz). If these two people start together, the total is harmonic because every two seconds the complete cycle is repeated.

Visually, we have here a wave with a frequency f (in black) and 4 harmonics of the frequency f divided by 2 (orange), by 3 (blue), by 4 (green) and by 5 (pink). It is as if someone were tapping their spoon once a second (black), while the other person is tapping twice a second (orange), the other 3 times (blue), another 4 times (green) and one last person taps 5 times per second (pink).

This is not important, but to be exact, in this illustration, the amplitudes are also divided by 2, 3, etc. It is as if the person who was tapping the spoon twice a second hit twice softer as the person who taps once a second, the person who taps 3 times per second taps 3 times softer, and so on.

harmonicsw5

As you can see below, this block can be repeated, this harmony will always exist.

harmonicsx2

Here is in short simplistic way what harmonics are all about, for ratios of 3/2, 5/4, 6/5, 9/8 etc., it is exactly the same, a wave will coincide with the other one permanently, for a ratio of 3/2 one wave will oscillate 2 times while the other will oscillate 3 times, for 5/4 one wave will oscillate 5 times while the other will oscillate 4 times, etc.

Harmonics are a special case of constructive interference,because interferences between multiple harmonics can only be constructives. There can be no destructive interference between harmonics.

To be continued